How to choose the carbide threading insert ？

When choosing the most suitable carbidethreading insert for your application, you need to consider the insert type, flank/radial clearance, and insert geometry. These are VBMT Insert all factors that influences chip control, insert wear, tool life, and thread quality.How to choose the insert type?When turning a thread, there are three main insert types to choose from: full profile, V-profile, and multi-point inserts. Each type has its advantages and disadvantages.Full profile insertThe full profile insert is the most common insert type. It is used to cut a complete thread profile, including the crest.V-profile insertV-profile inserts do not top the thread crests. Therefore, the outer diameter for screws and inner diameter for nuts must be turned to the right diameter prior to Cemented Carbide Inserts threading.Multi-point insertMulti-point inserts are similar than full profile inserts but have more than one insert point (NT>1). A two-point insert doubles the productivity, and a three-point insert triples the productivity, etc.Related search keywords:carbide cutting tools,carbide cutting tools manufacturers, carbide cutting tools for lathe,threading insert,carbidethreading insert, thread turning inserts,round threading insert, threading inserts, threading inserts for lathe, threading inserts manufacturersthreading insert specifications, threading insert types, threading insert tool holder, threading insert tool, carbide insert threading tool, threading insert wood The http://arthuredwi.mee.nu/ Blog: http://arthuredwi.mee.nu/